Helical Pinion Mod 1.5 T40 with 2xM4 x Ø14.0

Helical Pinion Mod 1.5 T40 with 2xM4 x Ø14.0

Helical Pinion Mod 1.5 T40 with 2xM4 x Ø14.0


Material: C45
Teeth Heat Treatment: Induction
The heat Induction process provides more consistent thermal treatment on the teeth as appose to the oxy treatment process that were previously manufactured on our spur gears Rack and Pinion system.

What is helical gear?

Gears are a key component of motor and machinery actuators; they increase the output torque and control the direction of rotation or the speed.

Helical gears operate more smoothly and silently when compared to spur gears. This difference is due to the oblique manner in which their teeth interact in relation to the rotational axis. This axis may be parallel, or generally crossed at 90°. In case it is crossed, helical gears are applied together with a worm gear, even though on these cases, two bevel gears may alternatively be used.

When two of the teeth move, contact is gradual, beginning at one end of the tooth, and staying in contact with the gear, which rotates until full contact is achieved. The typical helix angle ranges from about 15 to 30 degrees. On the other hand, the thrust load varies in direct proportion to the magnitude of the tangent of the helix angle.

Advantages Of Helical Vs Spur Gears

  • The angled teeth work more gradually, allowing for smoother and more silent gear operation when compared to spur gears or toothed wheels.
  • Helical gears last longer and are ideal for high-load applications since they have a higher amount of teeth in contact.
  • The load is at all times distributed among several axes, which produces less wear.
  • They can transfer motion and power both among parallel and straight-angle axes


This Package included the following:
1x Helical Pinion Mod 1.5 T40 with 2xM4 x Ø14.0

Write a review

Note: HTML is not translated!
    Bad           Good

  • Views: 278
  • Product Code: HELICAL PINION MOD 1.5 T40 WITH 2XM4 X Ø14.0 ID:1105
  • Availability: In Stock
  • $31.30

Tags: Helical Mod 1.0 - 3000mm Rack System, Helical Mod 1.5 - 3000mm Rack System, Helical Pinion Mod 1.0 20T with 2xM4 x Ø6.1, Helical Pinion Mod 1.0 30T with 2xM4 x Ø8.1, Helical Pinion Mod 1.0 40T with 2xM4 x Ø10.1, Helical Pinion Mod 1.5 20T with 2xM4 x Ø10.1, Helical Pinion Mod 1.5 30T with 2xM4 x Ø14.1, Helical Pinion Mod 1.5 40T with 2xM4 x Ø14.1,

SFU2005 - 300MM Ballscrew Thread Cut Off Note: The thread does not have any end fini..
$11.90
CF10 | KR22 - 10mm Needle Roller Bearing  High-quality bearing distributes from the only sele..
$8.00
Helical Pinion Mod 1.0 T30 with 2xM4 x Ø8.1 Material: C45Teeth Heat Treatment: InductionThe hea..
$20.90
bottom: 5px; margin-left: 30px; -webkit-font-smoothing: antialiased; -webkit-tap-highlight-color: tr..
$158.30
HGR20 - 1500mm HG Linear Guide Rail Suite HGCA or HGWA Mount Carriage that we havel listed.Decript..
$165.00
Bevel GearsThe bevel gear below is gear from various application. Idealy for application such as 3D ..
$12.50
HGR30 - 1000mm HG Linear Guide Rail Suite HGCA or HGWA Mount Carriage that we havel listed.Decript..
$156.00