-130x100.jpg)
-250x250.png "SK20 - 20mm Shaft Support Mount")
-250x250.png "SC16UU - 16mm Shaft Bearing Mount")
-250x250.jpg "Flexible Spider Coupling D30 L40mm")
-250x250.jpg "SBR20UU - 20mm Linear Bearing Mount")
SBR25UU - 25mm Linear Bearing Mount
-1500x1500.jpg "SBR25UU - 25mm Linear Bearing Mount")
SBR25UU — 25mm Short Supported-Rail Bearing Mount
A compact open linear-bearing mount for a compatible 25mm SBR supported round rail. The short aluminium housing carries the matching LM25UU-OP bearing format so the carriage can travel over the rail support profile.
SBR25UU at a glance
Supplier catalogue reference — confirm the supplied item before final fitmentSBRXUU short-mount dimensional data sheet
The complete source sheet below identifies the short SBRXUU family. The translated row is the exact SBR25UU reference; catalogue basic load values are shown in Newtons with a simple kgf equivalent.
| Model | Bore | h | E | W | L | F | h1 | Angle | B | C | Thread | L1 | T | Insert | Dynamic C | Static C0 | Weight |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| SBR25UU | 25mm | 27mm | 30mm | 60mm | 65mm | 47mm | 11.5mm | 50° | 40mm | 40mm | M6 | 12mm | 14mm | LM25UU-OP | 980N ≈ 100kgf | 1570N ≈ 160kgf | 450g |
Where SBR25UU is used
- Runs on a compatible 25mm SBR supported round rail.
- Short housing suits compact carriage plates and closer mounting points.
- Open underside allows the bearing to pass over the aluminium rail support.
- Commonly used in CNC, automation, positioning and workshop linear-motion assemblies.
How to read the catalogue ratings
Dynamic: 980N (about 100kgf equivalent force). Catalogue comparison value while the bearing is moving.
Static: 1570N (about 160kgf equivalent force). Catalogue comparison value while the bearing is stationary.
These are bearing basic load ratings, not lifting ratings or guaranteed working payloads. Actual usable load depends on rail support, carriage spacing, alignment, mounting stiffness, travel speed, shock and the complete machine design.
Australia-wide supply from Melbourne
Stocked in Melbourne with delivery available across Victoria, New South Wales, Queensland, South Australia, Western Australia, Tasmania, the Australian Capital Territory and the Northern Territory.
Browse NCMASTER linear guide systems for matching shafts, supports and related linear-motion hardware.
-250x250.jpg "Square Nut 3030 M8 Aluminium Profile - 50 Pcs")
-250x250.jpg "SFU2510 - 1100mm End Machined Ballscrew Thread for BKBF20")
