Mach3 USB CNC 4 Axis Smooth Stepper Motion Breakout Board

Mach3 USB CNC 4 Axis Smooth Stepper Motion Breakout Board
CNC MACH3 USB 4 Axis 100KHz USB CNC Smooth Stepper Motion Controller card breakout board for CNC Engraving 12-24V

This USB motion control card has the below advantages: small volume, easy to use, has a strong anti-interference ability, No need to install any USB drivers,it can be used after plugging in the computer. , suitable for all versions of Windows. Fully supporting all Mach3 versions.
 1. Support for 4-axis linkage, you can connect four stepper motor drives or servo drives;
 2. Maximum step-pulse frequency is 100KHz, which is suitable for the servo or stepping motor;
 3. Support automatic probe tool
 4. Support Emergency input
 5. Support for limit switch
 6. Support for connecting electronic handwheel
 7. Need to use an external 24V DC power supply to isolate USB and external ports, and to make the system more stable.
 8. Have a 0-10V output port, you can use mach3 software to control the spindle motor speed.
 9. 4 general-purpose inputs, you can connect the limit switch, estop switch, probe switch, back to zero and another device
 10. 4 general-purpose isolated relay drive output interface, can drive four relays for controlling the spindle starts, forward rotating and reverse rotating, pumps and another device;
 11. 1 status LED, indicate connection status on the board. 
12. Please note: No anti-backlash compensation this new motion controller

Package Included:
1x Mach3 4 Axis USB CNC Controller card 100KHz 
1x USB cable(With two magnetic shield) 
1x English user manual and mach3 software will send by a CD 

Write a review

Note: HTML is not translated!
    Bad           Good

  • Views: 3420
  • Availability: In Stock
  • $111.50

Tags: Mach3 USB CNC 4 Axis Smooth Stepper Motion Card Controller Breakout Board

End Rod Female Bearing PHSA20 - M20 x 1.5 Features:Oscillating bearingWidely used in hydraulic cyl..
SC16LUU - 16mm Shaft Bearing Mount Comments:High-quality bearing distributes from the only select..
Hex Socket Cap Screw SS(304) M6 x 20mm - 50pcs This Package included the following: 1x Hex Sock..
SFU1204 - 1000mm Ballscrew End Machined Thread for BKBF10 Features include: Professionally m..
Drag Chain Carrier HTTL15 - 15x30x1000mm Long    Brief Introductionsmove flexibly, lo..
NEMA 34 Stepper Motor 8.5N.m 1200oZ - Keyway Out of Stock
Nema 34 Stepper Motor 8.5N.m 1200oz.inThis is Nema 34 stepper motor, with 1.8°step angle (200 steps/..
HGR15 - 3000mm HG Linear Guide Rail Suite HGCA or HGWA Mount Carriage that we have listed.Descript..