Support all the Mach3 versions, including the latest edition: Mach3 R3.042.040.

No need to install any USB drivers. Plug-and-Play on all Windows system including 32bits and 64 bits Windows 2000/XP/Vista/Windows 7.

Support for USB hot swapping. To monitor USB attachment state any time. While Mach3 is working, if you uproot USB cable, then plug it also can make it work at once.

Support 3 Axis linkages. Including inching, as well as 4 shaft linkage.

Maximum output 200 KHz step-pulse frequency. Suitable for servo and stepping drivers.

There are 8 super-speed 10 MHz optocouplers, 24 General optocouplers, so the total amounts of optocouplers are up to 34. Isolate all the input/output. The High costs design provides a complete anti-jamming function and perfect security protection.

Have on-board isolation power supply, NO external power supply. Simplify the requirements of electric power supply. It’s convenient to connect the external power supply can also be used, so you can have any choice you like.

Support the following functions: Automatic tool-setting, electronic handwheel, software limit, software backlash.

Speed: 48M, Real-time input signal without PC intervention, The Signal is independently processed by the Movement Control Cards. Ensure that you get really real-time information and reliability.

Have a status indicator to indicate Mach3 attachment and USB connectivity. All kinds of state are clear for you at a glance.

Have 16 input indicators. Clearly indicates the status of signal-input.

Have Speed-measurement function, The Spindle actual speed is displayed on the Mach3 interface in real-time. And provide real-time speed graph to make the speed variations clear and lively.

Suitable for all stepper and servo drivers that driven by Step and Dir signals.

This breakout board is just an interface board, NOT a stepper driver board, it must work together with the micro-step drivers(eg. MA860H etc..) to control the stepper motors. So, it CANNOT control the stepper motors solely.