-130x100.jpg)
-40x40.jpg "SFU2005 - 300MM Machined Ballscrew Thread for BKBF15"){kind=small}
-40x40.png "SC20UU - 20mm Shaft Bearing Mount"){kind=small}
-40x40.jpg "M5 × 12 mm T-Slot Drop-In Bolts for 2020 Profile — 50 Pack"){kind=small}
-250x250.png "SK20 - 20mm Shaft Support Mount")
-250x250.png "SC16UU - 16mm Shaft Bearing Mount")
-250x250.jpg "Flexible Spider Coupling D30 L40mm")
-250x250.jpg "SBR20UU - 20mm Linear Bearing Mount")
MOD 1.5 - 1500mm Spur Rack System
-1500x1500.jpg "MOD 1.5 - 1500mm Spur Rack System")
Click Image for Gallery
-1500x1500.jpg "MOD 1.5 - 1500mm Spur Rack System")
-1500x1500.jpg "MOD 1.5 - 1500mm Spur Rack System")
-1500x1500.jpg "MOD 1.5 - 1500mm Spur Rack System")
-1500x1500.jpg "MOD 1.5 - 1500mm Spur Rack System")
MOD 1.5 - 1500mm Rack System
The material is C45 similar to CK1045, K1045, etc - it is heat treatment material suitable for tooling application etc.
The pinion is sold separately.
The material is C45 similar to CK1045, K1045, etc - it is heat treatment material suitable for tooling application etc.
The pinion is sold separately.
Improvement: The rack is blackened to add resistance to rust.
Various thread holes at intervals were also added.
Rack Range:
MODULUS 1.0 (15mm X 15mm) - 1000mm
This Package included the following:
1x MOD 1.5 - 1500mm Rack System
MODULUS 1.0 (15mm X 15mm) - 1500mm
MODULUS 1.0 (15mm X 15mm) - 2000mm
MODULUS 1.0 (15mm X 15mm) - 3000mm
This rail suit the Mod 1.0 Pinions that we have listed.
MODULUS 1.5 (17mm X 17mm) - 1000mm
MODULUS 1.5 (17mm X 17mm) - 1500mm
MODULUS 1.5 (17mm X 17mm) - 2000mm
MODULUS 1.5 (17mm X 17mm) - 3000mm
This rail suit the Mod 1.5 Pinions that we have listed.
Note: The 1000mm and 2000mm rack are not standard stock therefore, it will be cut in using a cold saw and is spray painted matt black where it is cut.
We also have Helical Rack and Pinion system available which is better than this standard Rack and Pinion.
Please check them out if you are interested.
This Package included the following:
1x MOD 1.5 - 1500mm Rack System
