-130x100.jpg)
-40x40.jpg "SFU2010 - 2000mm Ballscrew Thread Cut Off"){kind=small}
-250x250.png "SK20 - 20mm Shaft Support Mount")
-250x250.png "SC16UU - 16mm Shaft Bearing Mount")
-250x250.jpg "Flexible Spider Coupling D30 L40mm")
-250x250.jpg "SBR20UU - 20mm Linear Bearing Mount")
HCW15CC - HG Linear Motion Carriage Guide
Click Image for Gallery
NCMASTER Viewer
3D preview for product reference.
HCW15CC - Wide-Flange HG Linear Carriage
A wide-flange profile-rail carriage for a compatible 15mm HG rail. The broader mounting face provides a larger carriage-plate interface than the compact HCH format.
15mm HG railWide flangeHCW geometryMelbourne stock
HCW15CC at a glance
Catalogue reference — confirm the supplied unit before final fitmentRail width / height15 / 15mm
Block W x L x H47 x 61.4 x 24mm
Mounting referenceM5
Dynamic load rating11.38kN (about 1,160kgf)
Static load rating16.97kN (about 1,730kgf)
Block weight0.17kg
NCMASTER HCW English dimensional data sheet
The full-width English sheet pairs the NCMASTER HCW designations with the verified wide-flange source geometry and presents the dimensions, catalogue ratings, moments and mass without Chinese headings.
Catalogue load ratings
Where HCW15CC is used
- Pairs with a compatible 15mm HG profile rail.
- Wide flange provides a broader mounting face for a carriage plate.
- Mounting dimensions and rail size must match the exact supplied carriage and rail.
- Suitable for guided linear motion after alignment, support and load sharing have been checked.
Australia-wide supply
Available from Melbourne for delivery across Australia. Confirm the matching rail size and carriage designation before ordering.
1×
Included in this listing1 x HCW15CC wide-flange 15mm HG linear carriage
-250x250.jpg "SFU1605 - 1900mm Ballscrew End Machined Thread for BKBF12")