-130x100.jpg)
-250x250.png "SK20 - 20mm Shaft Support Mount")
-250x250.png "SC16UU - 16mm Shaft Bearing Mount")
-250x250.jpg "Flexible Spider Coupling D30 L40mm")
-250x250.jpg "SBR20UU - 20mm Linear Bearing Mount")
16T-15W-10B — 3M K-type Drive Pulley, 10mm Plain Bore
16T-15W-10B — 3M K-type Drive Pulley, 10mm Plain Bore
A 16-tooth K-type drive pulley for 15mm wide 3M belts, with a 10mm plain bore. The flanged body guides the belt through a compact drive assembly, making this configuration useful for CNC, automation and general machinery with a matching timing-belt system.
16T-15W-10B quick reference
Approximate drawing dimensions — verify the supplied pulley before machining16T-15W-10B dimensional data sheet
English dimensional reference adapted from supplier drawing 16S3M150-K-P8 for this 10mm plain-bore K-type drive pulley. The source shows an 8mm bore; the bore is adapted to 10mm for this listing. The 17mm dimension is the toothed groove width; nominal belt width is 15mm. Select the image for a full-size view and verify the supplied pulley before final machining.
Why use the 16T-15W-10B pulley?
- 16 teeth provide a defined pulley ratio when paired with the selected mating pulley.
- Designed around a 15mm wide timing belt for a compact belt-drive layout.
- Flanges help guide the belt when the pulleys are correctly aligned.
- The 10mm plain bore suits a matching shaft diameter; confirm shaft fit and the required pulley retention method.
- The Ø18mm flange, Ø18mm hub and 29mm overall height provide useful reference dimensions when planning drive clearances.
Approximate technical dimensions
| Model | Bore Ø | Flange Ø | Hub Ø | Tooth OD | Groove width | Overall height | Bore type |
|---|---|---|---|---|---|---|---|
| 16T-15W-10B | 10mm | 18mm | 18mm | 14.52mm | 17mm | 29mm | Plain |
Reference: Source-confirmed drawing dimensions: Ø18mm flange and hub, Ø14.52mm tooth outside diameter, 17mm groove and 29mm overall height. Adapted supplier reference • Not to scale. Measure the supplied pulley and shaft before machining or setting final clearances. The 17mm groove dimension applies to the pulley; select a nominal 15mm wide belt.
Australia-wide supply
NCMASTER supplies timing-drive components for customers across Victoria, New South Wales, Queensland, South Australia, Western Australia, Tasmania, the Australian Capital Territory and the Northern Territory.
For help matching this 10mm plain-bore pulley to your drive, provide the belt profile, belt width and shaft dimensions.
-250x250.jpg "SFU1610 - 2000mm End Machined Ballscrew Thread")
