-130x100.jpg)
-40x40.jpg "Drag Chain Carrier HTTL15 - 15x50x1000mm Long"){kind=small}
-40x40.jpg "SFU1605 - 2000mm Ballscrew End Machined Thread for BKBF12"){kind=small}
-250x250.png "SK20 - 20mm Shaft Support Mount")
-250x250.png "SC16UU - 16mm Shaft Bearing Mount")
-250x250.jpg "Flexible Spider Coupling D30 L40mm")
-250x250.jpg "SBR20UU - 20mm Linear Bearing Mount")
Drag Chain Carrier HTTL45 - 45x125x1000mm Long
Click Image for Gallery
HTTL45 cable management
HTTL45 Cable Drag Chain - 45 x 125mm x 1000mm - Bridge style
A 1m HTTL45 reinforced-nylon cable carrier with 45 x 125mm internal space for guiding cables and hoses through repeated movement. The bridge-style carrier provides practical access for installation and maintenance on CNC machinery and automation equipment.
At a glance
Internal size45 x 125mm
Length1000mm
Carrier styleBridge style
ConstructionReinforced nylon
Flexible cable and hose guidance
- Guides cables and flexible hoses through repeated machine movement.
- Also known as a cable carrier or energy chain for CNC and automation equipment.
- Reinforced nylon construction keeps the carrier light and corrosion resistant.
- Choose a bend radius that meets the minimum bend requirement of the largest cable or hose.
- Support and align both carrier ends to avoid twisting during travel.
Dimensional data sheet
The internal size identifies the usable cable space. Confirm the selected bend radius and mounting arrangement for the installation.
SeriesHTTL45
Internal size45 x 125mm
Outside size65 x 152mm
Bend radius options100 / 125 / 150 / 200 / 250mm
Pitch76mm
Connection reference6mm
Open full-size English dimensional table
Ordering note
This listing is for one 45 x 125mm x 1000mm bridge style cable drag chain.
Australia-wide supply
Stocked in Melbourne for delivery to Victoria, New South Wales, Queensland, South Australia, Western Australia, Tasmania, the ACT and Northern Territory.
-250x250.jpg "Wire Connector ID:26 SPL-8 32A 600V - 10 Pcs")
-250x250.jpg "LMK20LUU - 20mm Long Round Shaft Bearing Guide")
